Refrigeration Air Dryers - Refrigeration Air Dryers Manufacturer, Distributor, Supplier, Trading Company, Bangalore, India

<< Previous Refrigeration Air Dryers

Product Code : 02

Product Specification

Refrigeration Air Dryers

Unique Co-Ex Heat Exchangers
Our CO-EX Exchanger is a COAXIAL Heat Exchanger. It performs as a Precooler and Evaporator. Our design maximizes exchanger efficiency by using Copper tubes in a coiled TUBE-IN-TUBE arrangement. Tube sizes are carefully chosen so that fluid velocities are maintained through the tubes. This promotes turbulence break up boundary and maximizes the heat transfer rate with minimum pressure drop. To further increase heat transfer efficiency, a Counter Flow pattern is used that achieves the maximum temperature difference. In addition, exchangers are fully encapsulated by PUF insulation to prevent the loss of cooling effect.

Special Feature Of Co-Ex

Full copper corrosion free heat exchanger.
Non-fouling exchanger.
Co-Axial arrangement, tends to minimize space requirement.
Minimises power consumption
No leakage.
Low pressure drop.
High efficiency

Moisture Separator
Cyclonic / centrifugal type moisture seperator specifically developed by GEM for condensate removal in 2KD+ Series Dryers. Designed to achieve the highest separation efficiency and maintain this efficiency from low flows to well above the rated capacity.
Efficient separation ensures that liquid condensed in the Evaporator is not carried over by the outlet air, avoids raising the outlet Dew Point. Separator is encapsulated within PUF insulation to prevent re-heating of air before separation occurs.

Dependable Automatic Condensate Drain With The Following Features
Adjustable electronic timer controlled, Pilot operated, compressed air powered, Auto drain valve. Positive discharge of even heavily contaminated condensate.

Non-Cyclic Refrigeration System
HOT GAS BY-PASS Value automatically maintains temperature across a wide range and ambient conditions without the need any adjustments. High pressure by-pass refrigerant gas is introduced after the expansion value to ensure temperature control. Direct expansion, non-cycling allows rapid response to changes in operating conditions.

Ease Of Installation
All dryers are shipped pre-piped and wired, ready to install and operate, installation is made easy with conveniently located Air and Drain connections.

Electrical
In accordance with applicable codes Compressors are protected with overloads and safety trips.

Environmental
GEM DRYERS are designed for low energy usage, helping to conserve the Earth's Resources and minimize pollution. Refrigerants are with low ozone depletion factor, and thereby making 'GEM dryers' 'OZONE FRIENDLY'.

Service
GEM DRYERS are designed to require little maintenance. Should service be necessary, a team of trained technicians is available to answer your questions about installation, operation and maintenance or repair. A complete inventory of spare parts is maintained at the factory and channel partners & local service providers located all over India.

Technical Specifications

Base Model	Model Variance		Nominal Capacity @		Maximum Pressure		Electrical Connection		Air Connection	Rated Power
	B	D	cfm	mÃ‚Â³/h	bar g	psi g	220V / 1ÃƒËœ/50Hz	415V / 3ÃƒËœ/50Hz	In / Out	Air Cooled	Water Cooled
2KD + 002	OK	-	20	34	16	232	OK	-	^1/2"BSP(F)	0.15	-
2KD+ 004	OK	-	40	68	16	232	OK	-	1/2"BSP(F)	0.2	-
2KD+ 006	OK	-	60	102	16	232	OK	-	1"BSP(F)	0.4	-
2KD+ 008	OK	-	80	136	16	232	OK	-	1"BSP(F)	0.5	-
2KD+ 010	OK	-	100	170	16	232	OK	-	1^1/2"BSP(F)	0.6	-
2KD+ 015	OK	-	150	255	16	232	OK	-	1^1/2"BSP(F)	0.9	-
2KD+ 020	OK	-	200	340	16	232	OK	-	1^1/2"BSP(F)	1.2	-
2KD+ 025	OK	-	250	425	16	232	OK	-	2"BSP(F)	1.4	-
2KD+ 030	OK	-	300	510	16	232	OK	-	2"BSP(F)	1.6	-
2KD+ 040	OK	OK	400	680	16	232	OK	-	2"BSP(F)	1.9	1.6
2KD+ 050	OK	OK	500	850	16	232	-	OK	3"NB ASME Flg	2.3	1.9
2KD+ 060	OK	OK	600	1020	16	232	-	OK	3"NB ASME Flg	2.8	2.3
2KD+ 075	OK	OK	750	1275	16	232	-	OK	3"NB ASME Flg	3.8	3
2KD+ 100	OK	OK	1000	1700	16	232	-	OK	4"NB ASME Flg	5	4.1
2KD+ 125	OK	OK	1250	2125	16	232	-	OK	4"NB ASME Flg	5.7	4.8
2KD+ 150	OK	OK	1500	2550	12.5	180	-	OK	5"NB ASME Flg	6.8	6.2
2KD+ 200	OK	OK	2000	3400	12.5	180	-	OK	6"NB ASME Flg	8.7	8
2KD+ 250	OK	OK	2500	4100	12.5	180	-	OK	6"NB ASME Flg	11	9.6

Other Products in 'Refrigeration & Equipment' category

Refrigeration Industrial Chillers

<< Back